- Stock: In Stock
- Condition:: New
- Model: OIL UV SOLDER MASK
- SKU: 173687
Product Description
Features:
1. Green oil, a liquid photo solder resist, is an acrylic oligomer.
2. Due to the special nature of the material, the solder mask oil will not dry naturally. UV curing is required.
3. As a protective layer, it is applied to the circuit and substrate on which the printed circuit board does not need to be soldered, or used as a solder resist.
4. The purpose is to protect the formed line pattern for a long time.
Specification:
Model: WNB W-001 solder mask green oil
Material: Acrylic oligomer
Dielectric strength: >500V/mil
Solvent resistance: Trichloroethane boiled for 2 minutes without falling off
Solder resistance: 255-265 degree 10s * 3 times
Hardness: >5H
Curing condition: UV light
Capacity: 10cc
Application: PCB board repair essential materials
Gross weight: About 55.0g/set
Applications:
1. Prevent physical disconnection of the conductor circuit.
2. In the welding process, the short circuit caused by the bridge is prevented.
3. Welding only in the parts that must be welded to avoid solder waste.
4. reduce copper contamination of the welding trough.
5. Prevent deterioration and corrosion of insulation due to external environmental factors such as dust and moisture.
6. It has high insulation and makes it possible to increase the density of the circuit.
Instructions:
1. Apply the soldering mask oil ink to the motherboard that needs to be repaired. (Please apply as evenly as possible, and make sure the coating is not too thick.)
2. Use the UV flashlight to curing the coating. (Since the power of the flashlight is relative small, the curing time is about 5-15 minutes.)
3. To wipe the wrong substrate, it is recommended to use industrial alcohol or industrial cleaner.
Package Included:
1 x WNB 10ML Green Oil UV Solder Mask Ink
Detail Pictures:
More Detailed Photos:
